Initialising ...
Initialising ...
Initialising ...
Initialising ...
Initialising ...
Initialising ...
Initialising ...
synchrotron X-ray scattering and nanoindentation testIm, S.*; Jee, H.*; Suh, H.*; 兼松 学*; 諸岡 聡; Choe, H.*; 西尾 悠平*; 町田 晃彦*; Kim, J.*; Lim, S.*; et al.
Construction and Building Materials, 365, p.130034_1 - 130034_18, 2023/02
被引用回数：6 パーセンタイル：67.49(Construction & Building Technology)Nanocrystalline calcium-silicate-hydrate (C-S-H) is a typical heterogeneous material with a multiscale structure spanning a wide length scale from angstrom to micrometer, and whose structure is determined by the Ca/Si ratio. In this study, we directly applied compressive loads on synthetic C-S-H pastes with Ca/Si ratios of 0.6-1.2 and investigated their mechanical properties using the elastic modulus calculated at three length scale levels (i.e., angstrom to nanometer, micrometer, and millimeter) via in-situ synchrotron X-ray scattering, nanoindentation tests, and strain gauges, respectively. Further, 
Si nuclear magnetic resonance spectroscopy was conducted on the C-S-H pastes to elucidate the alterations in the silicate polymerization. The experimental results confirmed the deformation behavior of the C-S-H paste with different Ca/Si ratios under external loading, which was demonstrated to be transferred from the surface of the pastes to particles owing to the presence of multiscale pores.
垣内 一雄; 山内 紹裕*; 天谷 政樹; 宇田川 豊; 北野 剛司*
Proceedings of TopFuel 2022 (Internet), p.409 - 418, 2022/10
In order to examine the influence of cladding microstructural changes upon the mechanical property of the fuel cladding under LOCA conditions in a more direct and quantitative manner, the nanoindentation method has been applied to Zircaloy-4 cladding specimens after LOCA simulated tests (about 1473 K, ECR 20%, quench at 973 K after slow cooling); results for two specimens taken from the rupture opening part and secondary hydriding part were compared. In addition to hardness and Young's modulus, the plastic work fraction that corresponds to the relative ductility was evaluated from the load-displacement curve. The plastic work fraction at the secondary hydriding part was found to be obviously lower than that at the rupture opening part and closer to that in 
-Zr(O) layers beneath the outer surface. This result from the nanoindentation method agrees with the conventional knowledge about low ductility at the secondary hydriding part.
Wang, Y.*; 友田 陽*; 大村 孝仁*; Gong, W.*; Harjo, S.; 田中 雅彦*
Acta Materialia, 196, p.565 - 575, 2020/09
被引用回数：31 パーセンタイル：89.97(Materials Science, Multidisciplinary)The continuous and discontinuous yielding behaviors in ferrite-cementite steels were complementarily investigated via nano- and macroscale deformation examinations. The results obtained by electron microscopy, synchrotron X-ray, and neutron diffractions indicate that the ferrite-cementite interface of the heat-treated specimen is semi-coherent with a high internal stress field, whereas that of the recrystallized one is incoherent with a low internal stress field. Moreover, coherency strain, which depends on the total area of the ferrite-cementite interface, and thermal strain, which is governed by temperature, are the two factors that influence peak broadening. The nanoindentation tests revealed that the critical loads are significantly lower near the semi-coherent interface than those near the incoherent interface and the ferrite grain boundary; this suggests that dislocations are easily emitted from the semi-coherent interface.
